Are you having trouble finding the correct voltage for your rotary tattoo machine? Don’t worry, and you’re not alone.
Getting the perfect voltage for your machine can be tricky, but finding the sweet spot is important. Typically, a rotary tattoo machine should be run at a voltage between 4 and 8 volts.
In this article, I’ll show you all the answers you need to the question, “what voltage should I run my rotary tattoo machine at?” Keep reading to learn more.
- Knowing how to set up your rotary tattoo machine first is key to getting optimal results.
- If you are unsure what voltage to use, start with a lower setting and work your way up until you find the sweet spot for your machine.
- Remember that every tattoo machine is different and will require a different voltage setting to achieve optimal results.
Setting Up Your Rotary Tattoo Machine
Setting up your machine can be daunting if you’re new to rotary machines.
Before you start, make sure you have a rotary tattoo machine, tattoo power supply, foot pedal, needles, and ink.
Once you have your supplies, it’s time to set up tattoo machine.
Here’s a quick overview of how to do it:
- Connect the DC power supply to your coil machine.
- Connect the foot pedal to your machine.
- Insert the tattoo needles into your machine.
- Fill the ink cup with tattoo ink.
- Turn on the power switch supply and set it to the desired voltage.
Why Voltage Matters For Rotary Tattoo Machines?
As I mentioned, finding your machine’s perfect voltage is essential.
If the machine is running too LOW, it will not function properly. If the machine runs too HIGH, it can damage the machine and cause it to overheat.
Ideally, you want to find a happy medium between the two tattoo power supply settings. So, what’s the answer to “what voltage should I run my rotary tattoo machine at?”
You should run your machine at a voltage range BETWEEN 4 and 8 volts. Some coil machines may require a slightly higher or lower voltage to function correctly, but this is an excellent place to start.
Pro Tip: A coil machine is more likely to overheat at a higher voltage, so start at the lower end of the range and work your way up until you find the perfect setting.
How To Find The Right Voltage For Your Machine?
Now that you know why voltage is essential and what range you should be operating your machine, let’s talk about finding the correct voltage for your machine.
Here are a few ways that you can go about finding the perfect voltage for your machine:
1. Think About Your Tattoo Needles, Ink, and Speed Preference
First, consider the SIZE of your needles. The SMALLER the needles, the lower the voltage should be. For example, if you’re using a 3RL tattoo needle, you should use a voltage between 4 and 5 volts.
Second, consider the TYPE of ink you’re using. If you’re using a THICKER ink, you’ll need to use a higher voltage. For example, if you’re using black tattoo ink, you should use a voltage between 6 and 8 volts.
Finally, consider the SPEED you want to tattoo. If you want to tattoo QUICKLY, you’ll need to use a higher voltage. For example, if you’re looking to tattoo at a fast speed, you should use a voltage between 7 and 8 volts.
Pro Tip: Use a multimeter to test the voltage of your machine before you start tattooing.
2. Experiment With Your Machine
If you’re still unsure about what voltage to use, experimenting with your machine is another excellent way to find the perfect voltage.
Start by setting your machine to a LOWER voltage and tattooing a small area. You’re on the RIGHT track if the tattoo looks good and feels good.
If not, try INCREASING the voltage until you find the perfect sweet spot. The higher the voltage, the more likely it is to damage your machine, so be careful.
Pro Tip: Be sure to use basic tattoo power supplies with an adjustable voltage to easily change your machine’s voltage.
3. Refer To The Manual
If you’re still having trouble finding the perfect voltage, another great option is to REFER to the manual that came with your machine.
In most cases, the manual will have a section DEDICATED to finding the perfect voltage for your machine.
Keep in mind every machine is different, so it’s crucial to find the section in your manual that pertains to your machine.
4. Ask Around
If you’re still struggling to find the perfect voltage, another great option is to ASK around. Go to your local tattoo shop and speak to the tattoo artist there.
Chances are, they’ve gone through the SAME process of finding the perfect voltage for their machine and may be able to give you some great ADVICE.
Asking around is a great way to get expert advice on finding the perfect voltage for your machine.
5. Digital Vs. Analog Screens
In recent years, there has been a debate over whether a digital screen or analog power supply is better.
Digital power supplies typically offer more PRECISE voltage control, while analog power supplies are often seen as being more AFFORDABLE.
So, which is better? The answer ultimately comes down to personal PREFERENCE.
Some tattoo artists prefer digital power supplies because they offer more PRECISE control over the voltage, while others prefer analog power supplies because they’re often more AFFORDABLE.
Ultimately, deciding which type of power supply to use is a matter of personal preference.
The video below has great tips too!
Tips For Making Sure Your Rotary Machines Run Efficiently
Now that you know how to find the perfect voltage for your machine, it’s time to learn about proper machine maintenance.
Proper machine maintenance is IMPORTANT for several reasons:
- To extend the life of your machine.
- To ensure that your machine is running at its best.
- To prevent potential problems down the road.
Here are a few tips for proper machine maintenance:
1. Keep Your Machine Clean
One of the most important things you can do to extend the life of your machine is to keep it clean. After each use, be sure to WIPE down your machine with a clean cloth. This will help remove any ink or debris on your machine.
In addition, it’s essential to clean the INTERIOR of your machine regularly. This can be done by disassembling your machine and cleaning all parts with mild soap and water.
2. Lubricate Your Machine
Another important thing you can do to extend the life of your machine is to lubricate it regularly.
Lubricating your machine will help keep the moving parts working properly and prevent potential PROBLEMS down the road.
Pro Tip: Be sure to use a light machine oil when lubricating your machine.
3. Store Your Machine Properly
When you’re not using your machine, it’s essential to store it PROPERLY. Be sure to store your machine in a clean, dry place. Also, keep your machine away from direct sunlight and heat sources.
4. Duty Cycle
When using your machine, it’s essential to be aware of the DUTY CYCLE. The duty cycle is the amount of time your machine can be used before it needs to be rested.
Most machines have a duty cycle of 4-6 hours. This means that your machine can be used for 4-6 hours before it needs to be rested.
After the 4-6 hour mark, it’s essential to give your machine a break. Allowing your machine to rest will help prevent potential PROBLEMS down the road.
Do I Need A Volt Meter?
No, you don’t need a volt meter, but it’s highly recommended. A volt meter will help you easily find the perfect voltage for your machine.
Will I Hurt My Client If I Use The Wrong Voltage?
Possibly. Using the wrong voltage can result in a poor-quality tattoo or even skin damage. It’s essential to find the perfect voltage to avoid any potential problems.
What Are The Risks Of Not Maintaining My Machine Properly?
Not maintaining your machine properly can result in PROBLEMS down the road. It’s essential to keep your machine clean and lubricated to avoid any potential issues.
I hope I have given you all the answers to the question, “what voltage should I run my rotary tattoo machine at?”
In conclusion, finding the right voltage for your rotary tattoo machine is crucial as it will help ensure that your machine is running properly and not damaging your equipment.
So, take your time to find the perfect voltage for your machine to get the best results with your tattoos.
So, what voltage were you running your rotary tattoo machine at? Let me know in the comments section!