Prevention is always better than cure, so learning to keep your hair dryer cord from tangling is as important as knowing how to untangle it.
Don’t worry; I’ve prepared a few tricks you can use to ensure that your hair dryer’s cord will remain straight and untangled!
Before I get to that, do you know why keeping the cord untangled or untwisted is important?
Table of Contents
Why It’s Important to Keep Your Hair Dryer Cord Untangled
Not only is a cable spaghetti counter-aesthetic, but it can also be hazardous, especially when left unattended.
They can attract dust and dirt [1], sipping through the spaces between the cords, adding to the “messy” look it already has.
Moreover, the copper wires inside the power cord could break eventually, too! These heat styling tools have complex wiring and don’t take the risk of getting into accidents.
So, it will be best to keep your hair dryer cord straight.
But how do you do this? What can you do to keep the cord of your hair dryer from forming and twisting on its own?
How Do You a Keep Hair Dryer Cord From Twisting?
Today, you can buy a cord detangler to help with this dilemma. They’re usually cheap, and they come in all measurements and sizes.
However, there are a few things that you can do to make sure that your corded appliances won’t be such a nuisance to you.
Tip 1: Use An Empty Toilet Paper Roll
An empty toilet paper roll is one of the simplest and best ways to ensure your hair dryer will greet you without tangled and twisted cords.
To do this, fold the cord of your hair dryer compactly and slip it into the empty toilet paper roll. Leave it pressed on for about a few hours for the cord to be used to that position.
When you take it out, it’ll still follow the roll’s shape, allowing you to reorganize it when you’re using it, even when you are about to put it inside the roll again.
Viola! You now have your DIY cord detangler!
NOTE: This is also an effective way to separate multiple cords and cables if you store them together.
Tip 2: Store Them Properly
The next thing you want to do is to make sure that you store them correctly and properly. What I mean by properly is that you should organize them.
What you can do is store devices and equipment that have long cords in separate containers to avoid tangling the cords up.
This simple tip can save you a heap of time because it will be less likely to tangle with the cords of other devices.
Another alternative would be to use a spiral wrap cord to ensure it’s arranged and organized accordingly.
EXPERT TIP: Refrain from wrapping the dryer’s cord to the device because this can cause severe damages to the internal wiring of your hair dryer.
Tip 3: Use Swivel or Retractable Cords
There are a lot of hair dryers out there equipped with a retractable or a swivel cord, which has been made to prevent overloading [2], which can result in massive fires
This will allow you to store the cord separately, keeping them away from all other cords and cables you have.
With a retractable or swivel cable, you wouldn’t need to stress out on your cables and cords tangling up!
Tip 4: Practice the Over-Under Method
The famous over-under method has been one, if not the most popular, way of keeping and storing devices with cables or cords.
It’s famous for the fact that it’s easy to do, and it can be dismantled accordingly, too. To do the correct over-under method, follow these steps:
- Grab one (1) end of the wire with one (1) hand and raise it to eye level.
- Then, using your other hand, take the other hand and slide it a little down the wire.
- Your first (1st) coil is done.
- For the next coil, twist your hand and then grab the wire with your palm in the same position (Step 2).
- As you are bringing the wire up, twist your palm backward.
- Alternate the steps until you coil the cord entirely.
Confused? Here’s a quick video you can use as a guide to learn the over-under method technique of coiling cables:
These are the top and best ways of keeping the cord of your hair dryer from twisting or coiling up.
Now, let me discuss the fastest and easiest way of detangling and straightening it in a few seconds!
Master the art of hairstyling with my guides on ‘How to Blow Dry Curly Hair Without a Diffuser‘ and ‘Can I Use My Hair Dryer After It Got Wet‘ for practical solutions and safety tips!
How to Swiftly Straighten and Detangle Your Hair Dryer Cord?
Take note that this method is not restricted to hair dryers alone. You can use it for other devices with wires or cables, such as chargers cables, headphone cables, cords of flat irons, and more!
Step 1: Lift the Hair Dryer and Check
Before you go ahead and untangle them, you must know what you’re dealing with.
So, you first want to check the hair dryer and the cord by lifting it to at least eye level. Check the volume of knots and tangles, and try to trace the original path of the cord.
Step 2: Loosen the Knots One By One
After identifying this, what you want to do next is loosen the knots one at a time. Don’t focus on one (1) knot in doing this.
Instead, try to look for all the knots ad loosen them individually.
QUICK NOTE: When you loosen them, check if untangling them wouldn’t lead to a new knot. Don’t push it out of the knot yet; loosen the compactness of the cables up first.
Step 3: Free the Loops
When the knots and tangles are loosened up, you next want to free the loops and straighten the power cord.
The best and easiest way to do this is to grab one (1) end of the hair dryer and use it as your lead to find and shoot through the loops.
QUICK NOTE: You must do them in order so that untangling the cords won’t lead to a new twist on the cable.
That’s just about it! That is how you untangle and straighten your hair dryer’s cord, even if it’s nearing the point of no return from being twisted!
FAQs
Here are a few answers to your questions regarding the tangling and twisting of these hair dryer cords!
Why Do Electrical Cords Get Twisted?
You can avoid this by organizing the loosening of the electrical cords and cables. Alternatively, you can use a cord detangler to avoid it, keeping it in its original position.
Is It Bad To Wrap The Cord Around The Hair Dryer?
Because of the stress and angles from the twisting, it could subtly misalign the formation of the copper wires inside the cord.
Do You Now Know How to Keep the Cords From Tangling Up?
If you want to learn how to keep your hair dryer cord from twisting, return to this guide and get all the information you need!
Remember, a stitch in time saves nine! Use a cord detangler, an empty paper towel roll, or any other product to keep your electrical cables securely in place!
Do you have more tips on how to keep the hair dryer cord from twisting? Let us know below!
References
- 1. Avoid Tangled Wires Hazards by Organizing Your Cords and Cables [Internet]. Compare and Shop Cheap Electricity Rates | Shop Texas Electricity. 2021. Available from: https://blog.shoptexaselectricity.com/avoid-tangled-wires-hazards-by-organizing-your-cords-and-cables/
- 2. Prevent Overloading Protect Extension Cords from Damage [Internet]. Available from: https://www.cpsc.gov/s3fs-public/5032.pdf
